Skip to main content

Third-Party Inverter Integration

If you already have a photovoltaic inverter from another brand installed at home, you can integrate its data into the cloud platform through the following methods. This enables you to:

  • Monitor PV generation in real time
  • Analyze household consumption and surplus energy flow
  • Optimize battery charging and discharging strategies

Currently, two integration methods are supported:

  1. Cloud account binding (cloud-to-cloud integration)
  2. Using a smart plug or smart meter to collect generation data

Method 1: Cloud-to-Cloud Integration​

Supported Scenarios​

The following brands are currently supported:

  • GOODWE
  • GROWATT
  • FusionSolar
  • SolarEdge
  • SolaX
  • Solplanet
  • Sungrow

More brands will be supported in future updates.

How It Works​

By linking your account from a third-party energy platform, the App can directly retrieve inverter data associated with that account.

Configuration Steps​

  1. Open the Energy Ease App and go to the Profile page.
  2. Tap Energy Integrations.
  3. Select your inverter brand.
  4. Log in to the third-party platform and grant authorization as prompted.
  5. Once authorized, the system will automatically sync all devices under the account and add them to your home.

👉 For detailed authorization instructions, see:

Method 2: Data Collection via Smart Plug or Meter​

Smart Plug

Smart Meter

How It Works​

A smart plug or smart meter measures the inverter’s AC output power. The collected data is then used as PV generation input for energy statistics and system optimization.

Configuration Steps​

Step 1: Install the Measurement Device​

Choose one of the following options based on your situation:

Option A: Smart Plug
  • Connect the inverter’s AC output to the smart plug.
Option B: Smart Meter + CT
  • The meter is installed in the home electrical circuit to measure voltage.
  • The CT clamp is attached to the inverter’s AC output cable to measure current direction and magnitude.

Step 2: Add the Device​

Add the smart plug or smart meter in the Energy Ease App and ensure the device is online.

Step 3: Configure Data Source​

  1. Open the App.
  2. Go to Profile > Data Source.
  3. In the Solar data source section, tap Custom.
  4. Select the plug or meter used for energy statistics.
  5. Save the configuration.

👉 For detailed instructions, please refer to: Data Source

Once configured, the system will automatically treat the measured power data as PV generation data. It will then be used for household energy flow analysis, generation statistics, and dashboard visualization.

warning
  • Ensure the measurement device is installed on the inverter’s AC output circuit.
  • Incorrect CT installation direction may cause negative or abnormal power readings.
  • This method is an indirect measurement approach, so values may slightly differ from inverter-native readings.